Name:Piggy Bank

Technical Requirements:
1. The surface of the cylinder is not sprayed with plastic, and the bracket and steel belt are sprayed with plastic.
2. The working pressure of the storage tank is 0.88MP
3. The interface is sealed with a plastic plug

Name:Piggy Bank

Technical Requirements:
1. The surface of the cylinder is not sprayed with plastic, and the bracket and steel belt are sprayed with plastic.
2. The working pressure of the storage tank is 0.88MP
3. The interface is sealed with a plastic plug

Name:Piggy Bank

Technical Requirements:
1. The surface of the cylinder is not sprayed with plastic, and the bracket and steel belt are sprayed with plastic.
2. The working pressure of the storage tank is 0.88MP
3. The interface is sealed with a plastic plug

Name:Piggy Bank

Technical Requirements:
1. The surface of the cylinder is not sprayed with plastic, and the bracket and steel belt are sprayed with plastic.
2. The working pressure of the storage tank is 0.88MP
3. The interface is sealed with a plastic plug

Name:Piggy Bank

Technical Requirements:
1. The surface of the cylinder is not sprayed with plastic, and the bracket and steel belt are sprayed with plastic.
2. The working pressure of the storage tank is 0.88MP
3. The interface is sealed with a plastic plug

Name:Piggy Bank

Technical Requirements:
1. The surface of the cylinder is not sprayed with plastic, and the bracket and steel belt are sprayed with plastic.
2. The working pressure of the storage tank is 0.88MP
3. The interface is sealed with a plastic plug

Name:Water Tank

Technical Requirements:
1. The welding is firm and reliable, and there should be no defects such as welding slag & middot; porosity, and the welding slag should be cleaned after welding.
2. The water tank assembly must not have any welding leakage, according to the standard and the relevant seals, and maintain a pressure of 02MPa and argon for 10Min
3. Keep the cleanliness inside the water tank so that it cannot contain impurities such as welding slag larger than 0.4mm, and the total amount should not exceed 1000mg.