Name:Operator

Technical Requirements:
1. The parts of the controller are required to be connected tightly and reliably.
2. The push-pull operation is smooth and free of stagnation.
3. The rotating parts of the controller require good sealing.
4. The surface of the controller is neat and beautiful, and the spray is black.

Name:Operator

Technical Requirements:
1. The parts of the controller are required to be connected tightly and reliably.
2. The push-pull operation is smooth and free of stagnation.
3. The rotating parts of the controller require good sealing.
4. The surface of the controller is neat and beautiful, and the spray is black.

Name:Operator

Technical Requirements:
1. The parts of the controller are required to be connected tightly and reliably.
2. The push-pull operation is smooth and free of stagnation.
3. The rotating parts of the controller require good sealing.
4. The surface of the controller is neat and beautiful, and the spray is black.

Name:Operator

Technical Requirements:
1. The components of the controller are required to be connected tightly and reliably;
2. The push-pull operation is smooth and free of stagnation;
3. The rotating parts of the controller require good sealing;
4. The surface of the controller is clean and beautiful, with black plastic spraying.
5. All rounded corners of the operating mechanism R5
6. The surface of the joystick is sprayed with plastic, the handball is smooth and has a work logo

Name:Operator

Technical Requirements:
1. The components of the controller are required to be connected tightly and reliably;
2. The push-pull operation is smooth and free of stagnation;
3. The rotating parts of the controller require good sealing;
4. The surface of the controller is clean and beautiful, with black plastic spraying.
5. All rounded corners of the operating mechanism R5
6. The length of flexible shaft A to B is 2 100mm, and the stroke is not less than 60mm
7. The core of the flexible axis is made of stainless steel with a core;
8. The model of the bearing used in the mechanism is 6003 and the implementation standard GB/T276-2013

Name:Operator

Technical Requirements:
1. The parts of the controller are required to be connected tightly and reliably.
2. The push-pull operation is smooth and free of stagnation.
3. The rotating parts of the controller require good sealing.
4. The surface of the controller is neat and beautiful, and the spray is black.

Name:Operator

Technical Requirements:
1. The parts of the controller are required to be connected tightly and reliably.
2. The push-pull operation is smooth and free of stagnation.
3. The rotating parts of the controller require good sealing.
4. The surface of the controller is neat and beautiful, and the spray is black.

Name:Operator

Technical Requirements:
1. The parts of the controller are required to be connected tightly and reliably.
2. The push-pull operation is smooth and free of stagnation.
3. The rotating parts of the controller require good sealing.
4. The surface of the controller is neat and beautiful, and the spray is black.
5. All rounded corners of the operating mechanism R5

Name:Operating mechanism

Technical Requirements:
1. The parts of the controller are required to be connected tightly and reliably.
2. The push-pull operation is smooth and free of stagnation.
3. The rotating parts of the controller require good sealing.
4. The surface of the controller is neat and beautiful, and the spray is black.

Name:Operator

Technical Requirements:
1. The parts of the controller are required to be connected tightly and reliably.
2. The push-pull operation is smooth and free of stagnation.
3. The rotating parts of the controller require good sealing.
4. The surface of the controller is neat and beautiful, and the spray is black.
5. All rounded corners of the operating mechanism R5
6. The length of flexible shaft A to B is 2250mm, and the stroke is not less than 55mm
7. The core of the flexible axis is made of stainless steel with a core;
8. The model of the bearing used in the mechanism is 6003, which implements the standard GB/T276 2013